Summary of Specifications:
GENERAL SPECIFICATIONS: 1. BC Transit Transfer/Change Card: (Exhibit A) a. Material: pre-striped GFI Direct Thermal 1 b. Length: 3.375 inches c. Width: 2.125 inches d. Form: cut singles e. Magnetics: Type 2750 OE, Width 0.375 f. One front color There are no security requirements, back colors, numbering, or pre-encoding requirements. 2. 1 and 2 Ride Pass: (Exhibit B) a. Material: pre-striped GFI 7 MIL, DT paper b. Length: 3.3750 inches c. Width: 2.1250 inches d. Form: cut singles e. Magnetics: Type 2750OE, Stripe width 0.376 f. There are 2 colors and 1 varnish g. Numbering is inkjet (sequence provided by Transit) h. Conditions of use printed on reverse side of pass There are no pre-encoding, hologram or back color requirements. 3. 31 Day passes (Regular, E&D, Student, and WERC Passes) and 12 Ride Pass: (Exhibit B) a. Material: Thermal poly, 10-mil – Optional direct thermal PET 10-mil b. Length: 3.375 inches c. Width: 2.1250 inches d. Front: 1) 2 colors and varnish 2) corner cut is: 45° 3) corner radius is .125 Back: 1) strip is magnetic type 2750 OE 2) strip width is .375 inches 3) strip begins at .25” from edge 4) position of numbering (sequence provided by Transit)is between edge and mag strip (lower right opposite corner cut) 5) signal aptitude is ISO 7811/6 (80-120%) There are no hologram or back color requirements.
