Specifications include, but are not limited to: Cab and Chassis: American Manufacturer _________________________ Box Delete _________________________ Three sets of keys _________________________ Mileage: 1500 Miles or Less (New) _________________________ GVWR minimum 10,400 _________________________ Regular Cab _________________________ SRW Cab to Axle 56” – 58” _________________________ Four Wheel Drive _________________________ Automatic Transmission _________________________ Electronic shift on the fly _________________________ Minimum 6.0 L V-8 Gasoline Engine _________________________ Minimum 175 amp alternator _________________________ Permanent anti-freeze protection to minus 30 degrees F. _________________________ Tires/wheels – Radial ply tires as required for _________________________ GVWR, 5 Tires and wheels, all season, all terrain tread _________________________ Manufacturer’s standard single color, white _________________________ Power Steering _________________________ Tilt Steering Wheel _________________________ Four wheel anti-lock braking system _________________________ Power Windows _________________________ Power Door Locks _________________________ Power Mirrors _________________________ Back up camera system installed, camera and lead _________________________ Provided by truck manufacturer for installation with body _________________________ Heavy Duty Vinyl Flooring throughout _________________________ OEM heavy duty rubber floor mats _________________________ Cloth seats, matching trim throughout in standard _________________________ Color, Steel or equivalent _________________________ Factory Air Conditioning _________________________ Heater/Defroster _________________________ Upfitter Switches for Accessories _________________________ AM/FM Radio with Bluetooth factory installed _________________________ Trailer/tow package _________________________ Factory installed trailer brake controller _________________________ Running boards _________________________ Jack and lug wrench _________________________ Body and Accessories: Body is to be comparable to (or an approved equal to) the Knapheide Steel Service Body 600 Series 56” - 58” CA. The utility body shall also have a rear hitch recess bumper and also an overcab material rack. Body Shell to be constructed of 14-gauge two sided A40 Galvanneal steel. Compartment tops and backs To be a one-piece seamless design. Doors, door open- ings, drip rails, and other exposed steel edges are to be hemmed for strength, safety, and resistance to corrosion. ________________________ Floor plate to be constructed of a minimum of 12-gauge Tread plate with a 1- 3/8 return on each side. The side Compartment back panel should overlap and interlock With the floor flange, providing support for the weight Of the side compartment. _________________________ Cross sills are to be constructed from 11-gauge steel With 50,000 –psi minimum yield strength. _________________________ The tailgate is to be constructed of 18-gauge two sided A40 galvanneal steel. Tailgate is to be a minimum of 12” high and be a slam-latchable style. In the open Position, the tailgate shall be level with the cargo floor. Tailgate shall not have any cables, chains, or bars to Support it in the open position so it can be used as a Work surface for jobs wider than the tailgate. ________________________ Doors are to be constructed of 20 gauge two sided A40 galvanneal steel. Doors are to be double paneled With an internal reinforcement for durability. ________________________ Corrosion resistant all stainless steel continuous Hinges are to be installed to provide full length support For the doors and pry-prof security with a built-in Weather shield. Hinges are to be spot welded to The doorframes and must be supported with a Six year warranty. ________________________ Corrosion resistant rotary latches shall be secured to The door panels by four threaded studs attached to the Back of the latches. Latches must have zinc die cast Handles with a brushed chrome finish that provides Ample hand clearance surrounded by an injection-molded Glass and mineral infused UV resistant nylon housing. The rotary latches are to be slam-latchable. ________________________ Adjustable strikers are to be affixed to the doorframes With screws. ________________________ Automotive “bulb type” neoprene door seals are to be Installed by the manufacturer of the body on all doorframes. ________________________ Double spring over center door retainers are to be installed On all vertical doors. Door retainers need to hold doors In positive open or closed position. Horizontal doors are To be secured in open position parallel to the ground by Heavy duty chain retainers. ________________________ Shelves are to be constructed of 18 gauge bright spangled Galvanized steel. Shelves are to have divider slots on 4” centers. Shelves need to have a minimum capacity Rating of 250 pounds. ________________________ The body is to be completely undercoated by the body Manufacturer using a water base acrylic. ________________________ Lighting is to meet all FMVSS standards. Wiring harness Is to be encased in a plastic loom and all wires are to be Colored for ease of troubleshooting. All marker, clearance, And R.I.D. lighting is to be LED type lighting. ________________________ An LED beacon is to be installed on material rack and wired to upfitter switch in cab ________________________
