Specifications include, but are not limited to: • Machine direction of operation to be Right-to-Left • Machine electrical voltage to be 208/60/3ph • Machine to include 15 kW electric immersion heater (wash tank) & 10kW electric immersion heater (rinse tank) controlled by solid-state thermostat with positive low water protection. • Machine to be provided with Internal, atmospheric stainless steel, pre-wired and pre-plumbed 30kW booster heater for 110-degree incoming water. (field convertible to 15kW for 140-degree incoming water). • Machine MUST be Energy Star Rated. (Electric Tank heat only) • Machine to have a minimum capacity of 342 racks per hour with 9.5 feet per minute conveyor speed. • Machine to include Opti-Rinse system using no more than .39 gallons per rack at 20 psi. • Machine to include final rinse rate to be 2.2 GPM or 132 GPH. • Machine to be provided with Configurable NSF Pot & Pan mode. • Machine to be provided with standard chamber opening dimension of 22” x 19 11/16” to accommodate up to six 18”x 26” sheet pans at one time. • Machine to be provided with water hardness input & delime notification • Machine to be provided with standard features which include a dirty water indicator with an optional shut down mode, energy saver mode, low temperature alerts for all zones & service diagnostics. • Machine to be equipped with anti-jam protection that includes an electronic sensor to monitor the conveyor drive output RPM and electrically shut the unit off in the event of a change in RPM. • Machine to have a dual side pawl conveyor driven by 1/6 HP motor providing a simultaneous even push through of the racks. • Machine to have double wall insulated hinged doors.
