Specifications include, but are not limited to: 1. Inspect and dip test all larval mosquito sites that are identified by the Weed and Pest Manager and apply biocontrol agents or pesticides approved by the Weed and Pest Manager as needed. 2. Potential sites have been marked on a map, viewable here: https://clcgisc.maps.arcgis.com/apps/mapviewer/index.html?webmap=bfd5fb22c4704c0385ce61041ad06a 25 3. Various formulations of the following products must be provided and applied at rates approved by the Weed and Pest Manager: Bacillus thuringiensis israelensis - Liquid/Granules/Briquettes/WSP/XRP/Donuts Bacillus sphaericus - Liquid/Granules/Briquettes/WSP/XRP/Donuts Methoprene - Liquid/Granules/Briquettes/WSP/XRP Larviciding Oil 4. Record each inspection or treatment in a digital format using an approved platform or one provided by Weed and Pest. 5. Maintain and calibrate all equipment to meet minimum standards. 6. Follow all local, state and federal pesticide use regulations. 7. Report hours worked to the Weed and Pest office each day. 8. Work will typically begin in early May and end in late September but can vary depending on environmental conditions. 9. All work will be subject to inspections by Weed and Pest staff. Project may be terminated by the City for non-compliance with ten (10) days of written notice. 10. Project is for one year with an option to extend for one year. Pricing options have been listed for both years of the project.
