Specifications include, but are not limited to: I. OPERATING SPECIFICATIONS 1. Operating weight shall be 4,005 Lbs. 2. Shipping weight shall be 3587 Lbs. 3. Rated capacity at 35% tipping load shall be 931 Lbs. 4. Ground clearance shall be 10.8 inches 5. Bucket hinge pin height shall be minimum of 101 inches 6. Lift arm force shall be minimum of 4,000 Lbs. Meets Specifications Yes No II. ENGINE 1. Engine shall be a 3- cylinder turbocharged diesel 2. Engine model shall be a Yanmar 3TNV86CT 3. Gross power rating shall be 38.2 HP 4. Three stage intake air cleaner 5. All systems shall be designed for ambient operating range of -22F to +118F 6. System shall include self-monitoring and warning mechanism including coolant temperature, air filter blocked, water in fuel, and hydraulic temperature 7. System shall include self-diagnostics that monitor faults and logs them in operator accessible display Meets Specifications Yes No III. UNDER CARRIAGE 1. Track type: General purpose track constructed of rubber compound with embedded co-polymer cords, all-purpose treads, and shall contain no steel 2. Track width to be 11 inches 3. Track length on ground to be 55 inches 4. Drive system: Two hydrostatic direct drive sprockets; controlled by a single joystick 5. Track shall be tensioned using simple screw-type mechanism not requiring grease or hydraulic pressure to maintain tension 6. Roller wheels: 12 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings
