Specifications include, but are not limited to: Contractor to install perimeter fence and associated gates (approximately 15,000 feet) to the below specifications: • 8’ high galvanized chain link fence • 9 gauge, galvanized, 2” square, knuckle, knuckle chain link • 2.5” OD x SS40 weight line posts, driven 48”, 10’ on center • 7 gauge, galvanized top tension wire 3” OD corner/end posts (set in 12” x 48” footings) o Brace posts (if needed) are to match • Double 1-5/8” OD brace and truss • 2” OD welded frame double swing or single swing gates o 3” OD posts for gate leafs up to 8’ wide o 4” OD posts for gate leafs 10-12’ wide o 6-5/8” OD posts for gate leafs 13’-15’ wide o 8-5/8” OD posts for gate leafs 15’-20’ wide o All SS40 weight gate posts set in concrete footings, 48” deep (3x width of posts for diameter) • 2.5” OD welded frames for cantilever slide gates • External, nylon rollers with covers • 4” OD gate posts set in 12” x 48” footings Contractor to clear vegetation as needed to complete fence installation.