Specifications include, but are not limited to: Mats and Carpet - Shall be free of spots, stains, gum, dirt and debris without causing damage. They shall appear visibly and uniformly clean. Adjoining walls, doors and floor surfaces shall also be free of dust, soil and cleaner residue. (Contracted services mats do not need to be shampooed.) Glass and Metal Surfaces - Shall appear streak-free, film-free and uniformly clean. This shall include the elimination of dust and soil from sills and ledges and heat registers. Dusting –All ledges, furniture, and other surface areas shall be free of dust and soil without damaging surfaces. They shall appear visibly and uniformly clean. Floor Appearance – Floors, cove base, corners and thresholds shall be free of dust, soil, gum, spots, stains and other debris. This shall include the elimination of cleaner residue and dried-slurry. Hard/resilient tile floors shall have multiple coats of a slip resistant seal and finish applied that result in a consistent high-shine. Floors, carpet, cove base and thresholds shall appear visibly and uniformly clean. This shall include the elimination of dust streaks, lint, standing water, cleaner residue, embedded soil, spots and foreign objects. Cold water should be used on waxed floors.