Specifications include, but are not limited to: Capable of printing in layer thickness of 0.013”, 0.010”, 0.007”, and 0.005”. For PLA material only print in layer thickness of 0.010” Must have integrated, enclosed and sealed material bay drawers; minimum two material spool bays, 1 for printing the model and 1 for support Must come with print processing software that supports the import of a native CAD file directly from the CAD software The following noise specification requirement must be met; around 35 dB when idle, and maximum 46 dB during build Parts should be produced within an accuracy of ± 0.2 mm, or ± 0.2 mm/mm, whichever is greateR Printer should have at least two material spool bays, 1 for printing the model and 1 for support, within the printer unit Printer should be accessible through wired and wireless network.