Specifications include, but are not limited to: Colors: Bag 1: Florescent red/pink and white; Bag 2: Black and gold PMS 1235 A sample bag may be required for approval before award. Fabric: UV protected, water resistant, weatherproof, vinyl or equal to or better. Weight: Minimum 20 12oz. fabric or better. No gusset Size: 19½” (W) x 29” (L) is strongly preferred but UWM will accept 20” (W) x 30” (L). If you care to bid both sizes, you may do so. You will need to complete and submit another cost sheet (Exhibit B). The sign covers slide in top down and are locked using cable ties at the bottom grommets. The top, left and right sides must be sealed so no water, snow can penetrate. Bag to be sewn on three sides with a width opening which must be stitch hemmed approximately 1” – 1.5” from the bottom. Grommets: Four (4): lower left and right bottom corners centered within the hemmed area approximately 1 – 2 “from the sides. Grommets must line up to each other for connecting. Grommets can be rubber, metal or plastic, plain or spurred. Color – Black or a dark color, no smaller than ¾”. Graphics: One and two sided, high-quality white/yellow reflective printed or reflective vinyl graphics with sealed edges; weatherproof, water resistant, UV protected or equal to or better. Artwork will be provided by UWM. Artwork must be pre-approved by Prasanna Nanda, kenneyr@uwm.edu before the order is produced. It is preferred that the artwork is shown on the product.