Specifications include, but are not limited to: •Gantry style torch mounting, aluminum extrusion construction for rigidity.• Rack and pinion drives in both axis• AC servo motors coupled to precision planetary gear reducers. • Travel speeds up to 1300" per minute•Machine base unitized with removable slag buckets. •Minimum 1.25" by 1.75" ways supporting 3.5" diameter X-axis wheels. 1.875" diameter full capture Y-Axis carriage bearings riding on .562" diameter ground and polished circular way. • Smoke removal system including a longitudinal duct built into the side wall of the table with an 8" diameter exhaust take off for connection to a dust collector. Six 20" zones with cam actuated dampers minimize the dust collector fan size by limiting the smoke extraction to thearea under the torch. Bucket design to maximize smoke extraction along entire width of the table. • Best smoke and dust extraction is achieved when 100% of the active cutting zone is covered.•Minimum table capacity of 2" thick material, 5 foot by 10 foot cutting area.