Specifications include, but are not limited to: 1. Safeguard property from falling objects coming from the roof. 2. Remove existing shingles, drip edge, and any damaged or rotted roof sheathing and/or deck board on garage. 3. Contractor to replace any rotted roof sheathing, and properly prepare surface for roofing material. Contractor also to address/repair fascia at NW corner behind gutter prior to re-roofing. 4. Dispose of any cable lines, antenna and satellite dishes, etc. 5. Install new drip edge on eaves. 6. Install engineered roof barrier/membrane. TIGER PAW or equivalent compatible with chosen roofing system. 7. Install starter strips at base of roof and roof eaves. 8. Use manufacturer supplied cap shingles of matching color to dimensional shingles for ridge caps. Any exposed nail heads to be covered with roof caulk or tar. 9. Install 30-year dimensional shingles TIGER PAW, or approved equivalent. PROJECT MANAGER MUST APPROVE THE COLOR BEFORE INSTALLATION. Contractor shall use a minimum of 4 nails per shingle; nails to be sufficient in length to secure shingle, and install at a 90 degree angle to surface. Installation to follow manufacturers guidelines. Color to match house roof. 10. Provide minimum 30-year manufacturer’s warranty on installed roofing system.
