Specifications include, but are not limited to: A. 18’ – Daniels 3-IN-1 Plow. No other brands or models are being considered at this time. Must be compatible and/or have necessary attachment to be used with 2022 JCB 542-70 Telahandler. B. Standard Features. ▪ Having a 12’ Center Section and 3’ Wing Ends ▪ 42” tall moldboard and wings ▪ Plow must be under 14’ wide at the widest point when in box configuration to fit through a 14’ wide door opening. ▪ Wings to be independently hydraulically rotated 90 degrees ▪ Both Wings at zero degree rotation (out) provide a 18’ Straight Blade ▪ Both Wings at 90 degree rotation (in) provide a 12’ Box Blade ▪ Wings can be rotated independently at any degree from 0 to 90 ▪ Wing rotation cylinders to be 3” bore & double acting – Use of hydraulic motors for rotation of wings not acceptable ▪ Plow to hydraulically angle up to 35 degrees in each direction (L & R) ▪ Full 35 degree angle available while one or both wings are rotated to any degree between 0 & 90 ▪ Angle cylinders to be 4” bore & double acting ▪ Snow plow to have full moldboard trip – Trip Edge not acceptable ; C. Additional Features. • (1 ea.) Moldboard Snow Flap, 12” X 12’ for Center Board • (1 set) Carbide Edge 3-IN-1 – 18’ • (4 ea.) Curb Guard for 27, 31, 34, and 4200 • (2 ea.) Skid Shoe Assembly D. Installation. • Provide labor support for first time connection to 2022 JCB 542-70 Telahandler.
