Specifications include, but are not limited to: Woven Geotextile Fabric Woven Geotextile Fabric must be made of 100% polypropylene slit film yarns. Woven Geotextile Fabric must be resistant of ultraviolet and biological deterioration, rotting, and acids. Woven Geotextile Fabric must meet the requirements of the AASHTO M-288-06 for Class 3 Stabilization and Separation applications. Woven Geotextile Fabric shall have a typical weight of 4.0oz/sy. Woven Geotextile Fabric shall have a minimum Elongation @ Break of 15% Woven Geotextile Fabric shall have a minimum Tensile Strength of 200 lbs. Woven Geotextile Fabric shall have a minimum Puncture Strength of 90 lbs. Woven Geotextile Fabric shall have a Water Flow Rate of 5g per minute. Woven Geotextile Fabric shall measure 12.’ in width by 432’ in length 6” Sod Staples Sod Staples must be 6 inches X 1-inch X 6 inches. Sod Staples must be U-shaped. Sod Staples must be made of galvanized steel.