Specifications include, but are not limited to: Must operate on 220V Three-Phase power.
Must have a minimum motor of 20 HP or above, 208/230/575 Volt, 3-Phase, 60 Cycle, totally enclosed fan-cooled or equal.
Must have a minimum processing rate of 180,000 + LBS ram force or more.
Must have an electrical conveyor that, when assembled, is maximum of 8 feet wide, maximum 14 feet high (including the conveyor), and a maximum 25 feet long. The baler machine’s height without the conveyor attached, is maximum 8 feet high.
Must be top loaded and with full bale eject capability.
Shall produce a Bale size of maximum 60”W x 30”H x 12-50” (variable length) bales. Bale tying is Manual/wire.