Specifications include, but are not limited to: 1.1 Current Equipment: The one (1) Forklift requiring maintenance is a Caterpillar 2EC25 Electric Forklift, Serial Number: A2EC263996. 3.1 Forklift Maintenance (Preventive and Corrective) 3.1.1 Vendor shall provide Forklift Maintenance in accordance with manufacturer’s recommendations and specifications, as well as industry best practices and activities listed in Exhibit A attached hereto and incorporated herein by reference. 3.1.2 Vendor shall furnish all equipment, tools, and parts necessary for the performance of the Forklift Maintenance. Equipment and tools will be provided at no cost to the Agency. 3.1.3 Vendor shall provide expendable materials used in the scope of performing under this Contract at no cost to the Agency. Such items may include, but are not limited to, grease, cleaning supplies, rags, etc. 3.2 Preventive Maintenance: 3.2.1 Vendor shall perform Preventive Maintenance on a quarterly basis in accordance with a schedule mutually agreed upon by the Vendor and Agency. 3.2.2 Vendor will be compensated for Preventive Maintenance activities through a quarterly fee. Vendor must provide parts necessary to perform Preventive Maintenance at no additional cost to Agency. Any cost for such parts must be included in the Preventive Maintenance fee. 3.3 Corrective Maintenance: 3.3.1 Vendor shall perform Corrective Maintenance as needed to restore the Forklift to working order. Vendor shall bill for Corrective Maintenance on an hourly basis. Parts for Corrective Maintenance may be billed using the multiplier bid as described below.