Specifications include, but are not limited to: 3.1.1 All doors will be numbered to correspond with the room where they are to be installed. All doors are to be labeled with these numbers and are to appropriately labeled in accordance with the State Fire Marshal Code, rules and regulations. 3.1.2 Steel craft masonry frames have been installed at our facilities and therefore, require Steel Craft Doors. All steel door and frame hardware locations to match “Steelcraft” locations. 3.1.3 Doors and frames must comply with ANSI/SDI 100 Recommended Specifications for Standard Steel Doors and Frames specified. 3.1.4 Hardware installation shall be installed at the site location. Factory or shop installation of hardware is not permitted.