Specifications include, but are not limited to: A separate conduit shall be provided for each set of mains, feeders, and branch circuits, except for single pole work on branch circuits where conductors may be grouped in accordance with the National Electrical Code ; 1. After installing conductors and cables and before electrical circuitry has been energized, test service entrance and feeder conductors for compliance with requirements. 2. Perform each visual and mechanical inspection and electrical test ; Use an infrared scanning device designed to measure temperature or to detect significant deviations from normal values. Provide calibration record for device. b. Record of Infrared Scanning: Prepare a certified report that identifies splices checked and that describes scanning results. Include notation of deficiencies detected, remedial action taken, and observations after remedial action.