3 EA Electrofishing Box, New and Unused 3.1.1 System must be removable for use on multiple units (pram barge, smaller Jon boat, raft, etc.) 3.1.2 Must be capable of sampling waters between 50-1800 µS. 3.1.3 Must have programmable electrofishing settings. 3.1.4 DC output must have pulsed and continuous output, square waveform, voltage adjustment from 0-600 volts at 1-volt increments, maximum output of 75+ amps, duty cycle adjustment from 1-100% in 1% increments. 3 EA Generator, New and Unused 3.2.1 Must be compatible with commercially manufactured air-cooled inverter generators. 3.2.2 Must have a minimum displacement 380cc. 3.2.3 Must have AC Output with 120/240 volts and be 7000 minimum watts. 3.2.4 Must have electric and recoil starting options. 3.2.5 Must have a five-gallon minimum fuel tank capacity. 2 EA 3.3 Electrofishing Boat, 2025 or Current Year Model, New and Unused 3.3.1 Must be US Coast Guard approved. 3.3.2 Must be an electrofishing boat. 3.3.3 Must be between 16-foot and 16-foot 8-inches in length. 3.3.3.1 V front/flat bottom 3.3.3.2 Minimum twin 60-HP 4-stroke outboard motors 3.3.3.2.1 Must have safety kill switch for outboard motors. 1 EA Large Electrofishing River Boat, 2025 or Current Year Model, New and Unused 3.4.1 Must be US Coast Guard approved. 3.4.2 Must be an electrofishing boat. 3.4.3 Must be between twenty-foot, and twenty-foot six inches in length, all welded aluminum boat. 3.4.3.1 V front/flat bottom. 3.4.3.2 Minimum twin 90-HP outboard motors. 3.4.3.2.1 Must have safety kill switch for motors. 3.4.3.2.2 Dual engine tie kit.
