Specifications include, but are not limited to: 1. GENERAL SCOPE OF WORK • Provide one (1) 10 mm double-faced LED display (Electronic Message Center) including specifications, installation, training and warranty as listed below. • Standard of design is Watchfire W10 model. ~or approved equal alternatives will be considered if they meet or exceed all specifications and requirements. • Buyer will provide primary electric run as required by the display manufacturer and as required for other electrical sign elements. 2. DETAILED SPECIFICATIONS AND REQUIREMENTS • The display and services associated with it, must meet ALL the specifications and requirements set forth below, as well as the general description above: 3. DISPLAY HARDWARE SPECIFICATIONSQUALIFICATIONS OF BIDDER • Resolution: 10mm • Double-faced • Active Display Area: 3' tall x 6' wide • Cabinet Size: 3'5" high x 6'3" wide • Matrix: 10mm = 90H'x 180W • Brightness: 7500 nits or greater • Color capacity: 1 quintijlion individual colors or greater • Viewing Angle: Vertical: 95-degree min and Horizontal: 150-degree min • Display must be self-contained and able to operate independently without use of any external computer or device, other than when transferring the program content initially • Modules: individually replaceable, 100% potted, automotive-grade connectors (no ribbon cables) with minimum size of 120 square inches per module and maximum size of 180 square inches per module
