Media Blast and paint fish screen components with two-part epoxy paint; the following components: Drum frames: 3'-0" diameter by 12'-0" length 2 EA Drive end channel: 3/16" plate 7 1/2" x 1'-6" w/ 2" flanges, top plate 3/8" x 1'-6" x 1'-8" one end, radius plate 1'-6" x 4'-3" w/ 1/4" x 2" flange x 6'- 4" 2 EA Idle end channel: 3/16" plate 6" x 8", top plate 3/8" x 6" x 8", radius plate 4'-6" x 1'-11" w/ 1/4" x 2" flange by 6'-4" 2 EA Bottom channel: C8 x 11.5 x 13'-5" 2 EA Top channel: C8 x 11.5 x 12'-2 3/8" w/ plate 1/2" x 8" x 12" one end 2 EA Motor covers: plate 11 GA x 1'-4" x 1'-6" x 2'-3" 2 EA Bearing hubs: plate 1/2" x 8" diameter w/ 3-3/4" x 5" round tube 4 EA Side Channel: C3 x 4.1 rolled, approximately 6'-10" 4 EA Cover Plate: 3/16" x 12" x 1'-5 1/4" 2 EA Cover Plate: 3/16" x 1'-5 1/4" x 3'-4" 2 EA
