Specifications include, but are not limited to: 1. Vacuum Carpet and Spot Cleaning Thoroughly vacuum all carpeted areas. Move and vacuum under all easily movable objects (chairs, waste receptacles, tables on wheels, typing stands, boxes, etc.). Be sure to replace all items moved. After vacuuming, leave all rugs clean, free from dust balls, dirt and other debris. Prior to vacuuming, broom all edges not reached by vacuum. Straight suction vacuuming is not acceptable. A motor driven Commercial grade vacuum with HEPA filtered exhaust or equipment that meets these standards is required and must be used exclusively in all carpeted areas. Empty dust and dirt from vacuum cleaner into a plastic trash bag, tie off and remove to a dumpster. As part of the vacuuming process, carpet spot cleaning is required on an ongoing basis. 2. Dust Mop Thoroughly dust mop all non-carpeted areas. Dust mop under all easily movable objects (chairs, waste receptacles, tables on wheels, typing stands, boxes, etc.). Be sure to replace all items moved. Dust mops must be treated with a product consistent with Sections J and K. Place dust and dirt into plastic trash bag, tie off and remove to Dumpster. 3. Microfiber Spray Mop Thoroughly Microfiber Spray mop all non-carpeted areas. Remove all visible dirt and debris, wads of gum, tar and foreign substances from the floor surfaces. Microfiber Spray mop under all easily movable objects (chairs, waste receptacles, tables on wheels, typing stands, boxes, etc.).