Specifications include, but are not limited to: This specification is to describe a 53’ Enclosed Semi-trailer kitchen support unit. The unit is to be divided into two separate sections. A 20’ area in the front that provides sinks, plumbing and shelving to support dish washing operations for a mobile kitchen. And a 33’ area to be used for general storage. ☐ The trailer interior shall be divided by a wall into a 20’ front section for dishwashing operations and the remaining length will be an open storage area. ☐ All unit interior work surfaces, walls and ceiling shall be covered with smooth stainless steel sheeting in the forward compartment. ☐ Interior floor of the front compartment shall be of diamond plate aluminum construction. Factory wood trailer floor is acceptable, but must be sealed, then covered with a suitable vapor barrier inside prior to covering with aluminum diamond plate. Underside of wood floor shall be sealed with a marine grade sealer or automotive undercoating. ☐ A stainless steel, three compartment, free standing sink shall be installed along the curbside wall toward the back right of the front compartment.