1. Capacity: 1.1 36,500lbs minimum at a 24-inch load center, operational up to a lift height of 13 feet. 2. Usage: 2.1 Equipment designed for industrial applications requiring heavy-duty material handling. 3. Mast and Lift 3.1 Two-stage mast with no free-lift capability. 3.2 Minimum lift height of 156 inches (positive lift to 13 feet). 3.3 Lowered height of 146 inches or less. 4. Forks and Carriage 4.1 Hydraulically actuated fork positioners with side-shift capability (12-inch range). 4.1.1 Fork dimensions: 2.5 inches thick, 10 inches wide, and 96 inches long, with a standard taper design. 4.1.2 Carriage width: 96 inches. 5. Power and Drive 5.1 Electric drive system with AC direct-drive motors and high-voltage inverters. 5.2 Energy storage capacity of 210 kWH, or higher, usable on-board battery, incorporating an efficient battery management system (BMS) and vehicle control unit (VCU). 5.3 On-board charger with a minimum 22 kW charging rate and Level 2 port compatibility. 6. Hydraulics 6.1 Multi-pump hydraulic system with high efficiency and support for 5 distinct functions. 7. Axles 7.1 Front drive axle: Planetary design with hydraulically actuated wet disc brakes. 7.2 Rear steer axle: Pivotal center trunnion axle with a double-ended steer cylinder.
