The work involved under the terms of this contract document shall be full and complete installation of the facilities, as shown on the plans and as described in the construction specifications, to include but not be limited to: Furnish and install approximately 1,400 - linear feet of 8-inch sewer main. Furnish and install 27-side sewer stubs Furnish and install new side sewers on private properties by either open trench or trenchless methodologies, including all necessary restoration work. Furnish and install 33 new ductile iron tees onto existing concrete main on private property. Furnish and install 8 48-in diameter manholes, depths varying. Trench excavation, including removal of existing unsuitable material, removal and abandonment of existing utilities, disposal of excavated material, shoring, and dewatering. Removal and replacement of asphalt concrete pavement, asphalt overlay, concrete curbs, gutters, sidewalks and driveways. ROW Surface and other restoration Furnish and install approximately 65 LF ductile iron Class 52 8-inch diameter restrained joint water pipe and restrained joint fittings with polywrap. Furnish and install a 12-inch x 8-inch tapping tee and valve assembly Installing and maintaining adequate TESC measures and restoring all disturbed areas. Temporary traffic control measures following the contract documents and applicable City of Renton and MUTCD standards. CCTV inspection of sewer mains. Pre and post Installation Inspection Bypass pumping.
