Specifications include, but are not limited to: The existing Wi-Fi network consists of the following: Ruckus Virtual SmartZone High Scale Controller, 30 Ruckus R650 WAPs (interior – 15 buildings), and 9 Ruckus T350 WAPs (exterior –6 buildings). All WAPs are connected directly to SBIT switching infrastructure (Juniper EX series). All switches are connected by single-mode fiber (two 10G LAG).There is also an old mesh network which consists of building attachments and four poles (eachwith solar panels, battery storage, mesh equipment and Wi-Fi radios). It is no longeroperational, but we would like to utilize the poles (might require new solar, storage, and equipment). Here is an example of setup… 1.Evaluate existing wireless coverage vs. desired wireless coverage. Identify which locations/areas need wireless coverage. Provide wireless coverage map. A KMZ file that shows government buildings, Tribal neighborhoods, existing fiber, and (old) mesh poles is available upon request.2.Utilizing existing wired infrastructure, install new WAPs in areas identified as needing wireless coverage. Installation includes cable run to MDF/IDF, WAP mounting, WAP configuration, and testing. SBIT IT will handle switch port configuration.3.Utilizing existing (old) mesh poles, (if needed) install new solar panels, charge controller, inverter, and battery storage, install new mesh and radio equipment. Installation includes (if needed) removal of old solar panels, charge controller, inverter andbatteries, installation of new solar panels, charge controller, inverter, and batteries(utilize existing cabinets if possible), Mesh and Radio equipment mounting, Mesh and Radio equipment configuration, and testing. SBIT IT will handle switch portconfiguration.
