COMPRESSION SEAL

Washington

07/23/2025 01:50 PM EDT

07/30/2025 01:00 PM EDT

SOURCES SOUGHT SYNOPSIS  - COMPRESSION SEAL

The Defense Logistics Agency Maritime Puget Sound is issuing this sources sought and request for information as a means of conducting market research to identify parties having an interest in and the resources to support a material requirement in Bremerton, WA.

1. COMPRESSION SEAL – QTY 4

SEAL-CPRSN,1.125ID, GA, SER, VHP, AQD A29012-34

P/N: 61117316

MFG: AQUADYNE

MUST BE A COMPRESSION SEAL, 1.125ID, GA SER, VHP, AQD A29012-34 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP.

2. COMPRESSION SEAL – QTY 3

SEAL-CPRSN,1.00 X 1.25, AQD A29012-33

P/N: 61117627

MFG: AQUADYNE

MUST BE A COMPRESSION SEAL 1.00 x1.25, AQD A29012-33 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

3.  O RING – QTY 35

O-RING, 2-032 BUNA-N 90 DURO

P/N: 30-001-032

MFG: AQUADYNE

MUST BE AN O-RING 2-032 BUNA-N 90 DURO FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

4. PACKING SEAT – QTY 6

SEAT-PKG, SERIES 50, .69, 20KSI

P/N: 61143732

MFG: AQUADYNE

MUST BE A PACKING SEAT SERIES 50, .69, 20KSI FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

5. PACKING REAR– QTY 6

PKG-REAR,1.0X.69X.19, CERAMIC

P/N: 61143739

MFG: AQUADYNE

MUST BE A PACKING REAR 1.0X.69X.19, CERAMIC FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

6. PACKING FRONT– QTY 17

PKG-FRONT1.0X.69X.19, MOLYGLS

P/N: 61143747

MFG: AQUADYNE

MUST BE A PACKING FRONT 1.0X.69X.19, MOLYGLS FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

7.  SPACER– QTY 14

SPCR-SPR, SERIES 50, .69 PLGR

P/N: 61143755

MFG: AQUADYNE

MUST BE A SPRING SPACER SERIES 50, .69 PLGR FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

8. SEAL HOLDER– QTY 8

HLDR-SEAL, LP, .69 SERIES 50

P/N: 61143714

MFG: AQUADYNE

MUST BE A SEAL HOLDER, LP, .69 SERIES 50 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

9. SEAL ASSY– QTY 7

SEAL ASSY- LP, .69

P/N: 61143633

MFG: AQUADYNE

MUST BE A SEAL ASSY, LP, .69 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

10. SUCT VLV– QTY 7

VLV-SUCT, SERIES 50, HP, 20KSI, AQD 40019-00

P/N: 61135748

MFG: AQUADYNE

MUST BE A SUCTION VALVE, SERIES 50, HP, 20KSI, AQD 40019-00 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

11. COMP SPRING– QTY 1

SPR-CPRSN, 9.75X .07 X 1.SST, AQD S24135-00

P/N: 61120199

MFG: AQUADYNE

MUST BE A COMPRESSION SPRING, 9.75X .07 X 1.50 SST, AQD S24135-00 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

12. VLV SEAT– QTY 6

SEAT-VLV, SERIES 250, UHP, AQD B19405-33

P/N: 61119277

MFG: AQUADYNE

MUST BE A VALVE SEAT, SERIES 250, UHP, AQD B19405-33 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

13. SCRW TY COUP– QTY 50

SCRW TY COUP ASSY; 1/2 NPT (15K MAWP) (GDWJ TY)

P/N: 20-003-008

MFG: AQUADYNE

MUST BE A SCREW TYPE COUPLING ASSEMBLY, ½ NPT (15KMAWP) (GDWJTY) FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

14. PLGR ASSY– QTY 3

PLGR ASSY – SERIES 50, .69

P/N: 61143773

MFG: AQUADYNE

MUST BE A PLUNGER ASSEMBLY, SERIES 50, .69 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

15. ADAPTER– QTY 50

ADPTR, 9/16 MP(M)X ½” NPT(M) 15K MAWP SS

P/N: 20-020-001

MFG: AQUADYNE

MUST BE AN ADAPTER, 9/16 MP(M)X ½” NPT(M) 15K MAWP SS FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

16. O RING – QTY 50

O-RING, METRIC M4 C/S X 140MM ID BUNA 70

P/N: 30-524-140

MFG: AQUADYNE

MUST BE AN O-RING METRIC M4 C/S X 140MM ID BUNA 70 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

17. RUPT DISC – QTY 8

RUPT DISC, 15K BURST ¼ A/S W/TAG

P/N: 35-006-150

MFG: AQUADYNE

MUST BE A RUPTURE DISC 15K BURST ¼ A/S W/TAG FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

18. PLUNGER – QTY 3

TRPLX-SERIES 50, 20KSI .69 PLGR, 15K BURST ¼ A/S W/TAG

P/N: 32-120-002

MFG: AQUADYNE

MUST BE A TRPLX-SERIES 50, 20KSI .69 PLUNGER FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP

19. BMX UNIT– QTY 5

TRPLX UNIT BMX 25-50H1KY.4GC480AOLKFDH

P/N: 32-110-611

MFG: AQUADYNE

MUST BE A TRPLX UNIT BMX 25-50H1KY.4GC480AOLKFDH FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP AND MUST HAVE:

-FLOW/PRESSURE: 7.38 GPM @ 10,000 PSI

-APS S-50 BASE UNIT

-20K AQUA-DYNE FLUID END, 0.69" PLUNGERS

-50HP 480VAC, 3PH, 60 HZ ELECTRIC MOTOR

-ACCESSORIES: GAUGE, PRV, RUPTURE DISC

-50HP AOL STARTER, 380,460VAC/3PH, FUSED KNIFE DISCONNECT

20. CRATE – QTY 1

CHARGE, CRATE, PKG, PMP SYS, SMALL S50/S100 *CRATE & SHIPPING CHARGES*

3 X S50 BARESHAFTS, 5 X S50 BLASTMAX CART PUMPS

P/N: 55-570-002

MFG: AQUADYNE

MUST BE A CHARGE CRATE PKG, PMP SYS, SMALL S50/S100 *CRATE & SHIPPING CHARGES* FOR THE FOLLOWING: 3 X S50 BARE SHAFTS, 5 X S50 BLAST MAX CART PUMPS

The results of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 339991 – Gasket/Packing/Seal Device Manufacturing

THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. 

If your organization has the potential capacity to provide these items, please provide the following information:

1. Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization, including vendor CAGE code; and,
2. Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability.

Responses are due in this office no later than 10:00 a.m. PDT, 13 JUNE 2025. Please send your capabilities statements and responses to this RFI via email directly to: jack.edwards@dla.mil

If you have any questions concerning this opportunity, please contact: jack.edwards@dla.mil

Attachments/Links

No attachments or links have been added to this opportunity.

Contact Information

Contracting Office Address

• CONTRACTING DIVISION (DLA-PME) 467 W STREET
• BREMERTON, WA 98314-5000
• USA

Primary Point of Contact

• JACK EDWARDS
• JACK.EDWARDS@DLA.MIL
• Phone Number 385-591-1129