Specifications include, but are not limited to: Carlisle fully adhered EPDM roof system; 60‐mil, black, non‐reinforced membrane material ½” wood fiberboard, tapered EPS roof insulation, 1” perlite roof insulation over metal roof deck Roofs drain toward external gutter One area within the 45,000sf is a domed roof system totaling approximately 11,000 sf +/‐. This dome roof is an old mechanically fastened EPDM batten in seam system. Health and Human Services Building (see attached aerial infrared picture) Roof Assembly #1 (5 different levels of roof systems totaling approximately 13,000 sf +/‐) Fully adhered EPDM roof system; 60‐mil, black, non‐reinforced membrane material ½” wood fiberboard installed directly to structurally sloped wood roof deck Roofs drain toward external gutter and internal roof drains Roof Assembly #2 (four smaller roof areas totaling approximately 3,000 sf +/‐) Ballast on top of 60‐mil, black, non‐reinforced EPDM membrane; Three (3) inches of isocyanurate insulation loose laid over metal decking. Roofs drain toward external through wall scuppers and internal roof drains