Specifications include, but are not limited to: 1.1.1 Test the door for operation and then reset. 1.1.1.1 Rolling fire doors must be drop tested twice. 1.1.2 Visually inspect the door on both sides for missing or damaged hardware. 1.1.2.1 Immediately replace any missing or damaged hardware. 1.1.3 Ensure no open holes or breaks are in the surface or frame. 1.1.4 Ensure slats, endlocks, bottom bar, guide assembly, curtain, entry, hood and flame baffle are installed correctly and intact. 1.1.5 Ensure curtain guides are aligned, level and plumbed for smooth operation. 1.1.6 Ensure drop release arms are unobstructed. 1.1.7 Ensure smoke detectors connected to the fire door are in good working condition and inspected per code. 1.1.8 Ensure release hardware is in good working condition, and fusible links are in the correct position and free of any coatings.