Specifications include, but are not limited to: GENERAL The machine shall be a high-speed, 36V system, battery-powered ride-on floor burnisher, driving a 27-in. (68.5 cm) diameter pad at a speed of 1500 to 1700 RPM. Machine runtime shall be up to 3.0 hours. CONSTRUCTION The frame shall be 10-gauge steel channel. The housing shall have a rotomolded control panel, motor cover, and bag cover. The flexiwall shield shall be ABS plastic with steel liner. PAD The pad speed shall be1500 to 1700 RPM. Three pad pressure shall be 50- 75 lbs. The pad driver shall be 27 in. (68.6 cm) in diameter, and be flexible, conform to floor contours, and “cup” the pad to the floor. RIDE-ON The top forward working speed shall be 264 ft/min and the top reverse speed shall be 60% of the forward speed. MOUNTING Mounting shall be on a welded powder-coated 10-gauge steel channel frame. Two 10-in. diameter (25.4 cm) wheels with ball bearings at the rear (pivot point) to carry battery weight and track the machine on a straight line. Two front 6-in. (15 cm) ball bearing swivel-type casters shall be provided. The drive wheels will be a non-marking grey rubber wheels. The casters will have urethane tread.