Specifications include, but are not limited to: 1. Clean entire facility, including foyers, hallways, offices, cubicles, nurses station, breakrooms, multipurpose room, kitchenettes, men’s and women’s bathrooms (including showers), laundry facilities, conference rooms, work stations and common areas. Only non-abrasive cleanser shall be used to avoid pitting, scarring and marring of surfaces. 2. The following tasks are to be performed at each visit in all areas, excluding stairways and restrooms. a. All interior and exterior trash receptacles are to be emptied and trash removed to a central collection point. Collected trash shall be placed completely inside trash dumpsters. The area around all dumpsters shall be kept clean of all materials, paper, litter, etc. Dumpsters shall be closed after use. Recycle container areas shall be kept clean and free of trash. Recycling materials shall not be placed in trash dumpsters. b. Using a treated cloth or static duster, thoroughly dust all unobstructed horizontal surfaces, including desk tops, file cabinets, window sills, chairs, tables and other furnishings, e.g. lamps up to 84 inches. Furniture not cleared of paper and work materials shall only be dusted where the surface is exposed. Equipment such as computers, calculators, telephones, printers, etc. shall not be dusted. c. Dust mop hard surface floors with a treated dust mop. d. Damp wipe hard surfaces including tables, counters, furniture, floors etc. to remove any liquid rings or other spillage. After mopping, the floor shall have a uniform appearance with no streaks, film, swirl marks, detergent residue, mop strings or other evidence of soil. Baseboards shall be wiped to remove all splash marks. e. Damp wipe entrance metal and remove fingerprints on entrance glass. f. Spot clean doors and partition glass. After cleaning, the surface shall present a uniform appearance free of all smudges, fingerprints, stains, streaks, lint, etc. g. Inspect and pick up, as needed, building entrance area.