Specifications include, but are not limited to: Secondary Roadways: Asphalt driving surfaces, unless specified otherwise in AREAS TO BE ADDRESSED following this section, shall meet the following criteria: a. The excavated area shall be square cut to the dimensions listed in AREAS TO BE ADDRESSED. b. All asphalt repairs shall be square or rectangular in shape. No trapezoids or curved sides. c. All sides shall be parallel and uniform in shape unless stipulated for a site listed in AREAS TO BE ADDRESSED. d. Sufficient asphalt, crusher run, and/or subsurface road material shall be removed to accommodate 4-inches of SM 9.5A asphalt concrete. Before installing the new SM 9.5A asphalt concrete, the road bedding shall be mechanically compacted with a vibrating compactor. e. The asphalt concrete shall be compacted and rolled to restore the normal driving surface profile in conjunction with the VDOT Bituminous Pavement Patch Standard for Secondary Roads.