Specifications include, but are not limited to:. 80” WIDE X 85” HIGH X 52” DEEP Height includes 6: FF and 2: Base Qty – 6 Flat file w/Heavy-duty suspensions – includes: 5 drawers @ 4.625” high Extension: 42” Qty - 2 Platform Base with Levelers – 4” high Case Construction: Metal will be no less than than .036” (20 ga.) steel for sides, top and bottom, and back, and .075” (14 ga.) steel for reinforcing structural channels. The cases need to be fusion welded for rigidity. Drawers: Drawers need to have no less than .036” (20 ga.) steel after fabrication. The drawer front will need to have a formed channel with two chrome handles and label holder. Each drawer needs to be supported with two case-mounted glides. Each heavy-duty glide need to have a ball bearing slide attached. Materials: All materials need to examined and found to be “non-reactive” which means that the material is chemically stable and does not off-gas or physically degrade to produce any of the following: urea formaldehyde, free sulfate radicals, sulfides, chlorides, acetates, chlorine, ammonia, volatile organic compounds, or plasticizers lacking long-term stability