Specifications include, but are not limited to: General: Sheet metal flashing and trim assemblies, including cleats, anchors, and fasteners, shall
withstand wind loads, structural movement, thermally induced movement, and exposure to
weather without failure due to defective manufacture, fabrication, installation, or other defects
in construction; Exposed Coil-Coated Finish:
a. Two-Coat Fluoropolymer: AAMA 2605. Fluoropolymer finish containing not less
than 70 percent polyvinylidene fluoride (PVDF) resin by weight in color coat.
Prepare, pretreat, and apply coating to exposed metal surfaces to comply with
coating and resin manufacturers' written instructions.