The Contractor shall furnish and deliver one (1) Texas-T Guardrail System. To include the following: 1. Texas-T Guardrail System to include two (2) boxing gloves. The Contractor shall provide all hardware needed to install guardrail to include bolts, washers, nuts, splice plates, 3” sleeves with bolts, washers and nuts to attach guardrail to post, etc. Splice Plates should have 8-⅝" nuts tack welded to a bent sheet metal positioner as shown in detail and shall be galvanized. 2. Seven (7) Each; W8 x 48 x 1’-1” long (Galvanized and Charpy tested) (ASTM A709 Grade 50) no holes 3. Two (2) Each; W8 x 28 x 4’-0” long (Galvanized and Charpy tested) (ASTM A709 Grade 50) no holes 4. One hundred twenty (120) Each; 7/8” diameter x 2 ¼” A325 bolts, with nuts and flat washers. (Galvanized) 5. One hundred twenty (120) Each; Direct tension indicators (DuraSquirt or equivalent as approved by the engineer) (Galvanized)
