Specifications include, but are not limited to: • Existing structural cracks shall be thoroughly cleaned of all dirt, grass and loose material and sprayed with a highly concentrated grass and weed killer to ensure against growth. These cracks should then be filled with acrylic crack and leveling compound. • Apply Riteway Crack Repair System to the filled cracks (approximately 330 LF.) centering the first layer of Riteway Microsealant Tape. This flexible layer is key to the system. “Slip-Sheet” systems are NOT an equivalent and not acceptable. • Apply liquid acrylic and latex binding formula (50/50) over Microsealant Tape. Apply second layer 20” stress Mat centered over first layer saturating with binding formula. • Apply binding edge, the 3rd layer of Riteway crack repair system, centered over stress mat edge. Let dry. • When dry, apply a minimum of two (2) coats of acrylic resurfacer with sand lengthwise over repairs. • Furnish and apply two (2) coats of acrylic resurfacer over repairs. • Repaired areas shall be touched up with color to the closest shade of existing CNU Blue as well as Green and White, as needed.