A. The Contractor shall furnish and deliver 192 fiberglass reinforced polymer sound wall absorption panels, mounting hardware (clips, etc.) flashing and manufacturers installation instructions as per all requirements listed herein. B. Installation of sound wall absorption panels will be done by other Contractor. C. Panels shall meet the following specifications: 1. Panels shall be listed on the VDOT Materials Division Approved Products List #65, see Attachment D. 2. Panels shall meet the specifications for reinforced fiberglass polymer absorptive sound barrier panels per Section 519.02 of the 2020 Edition of the Virginia Road and Bridge Specifications with all revisions. 3. Length of each panel is determined by the bay. See Attachment C. 4. Height of each panel shall be twelve (12) inches. 5. Thickness of each panel shall be 2 ¾”.
