The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract with priority requirements, of Technical Capability of the item, Delivery, Price, and Supplier Performance Risk System, as the Evaluating Factors for the item listed below. The required item is for commercial item prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice.
The Contract Line Items (CLINS) are as follows:
- Socket Weld Test Plugs ¾” QTY: 2
PN-SQS0107U
Socket Weld SQS Test Plug for 3/4" 3000# Class Socket Weld Fitting. Seal OD 0.79" (20.0mm). Gripper/Cone OD 1.03" (26.2mm). 1/8 M NPT. Max Pressure 5000 PsiG (343 BarG). Plug materials are Zinc Plated Steel body and Grippers with Urethane Seals.
2. Socket Weld Test Plugs 1” QTY: 2
PN- SQS0133U
Socket Weld SQS Test Plug for 1" 3000# Class Socket Weld Fitting. Seal OD 1.00" (25.4mm). Gripper/Cone OD 1.30" (33.0mm). 1/8 M NPT. Max Pressure 4800 PsiG (329 BarG).
Plug materials are Zinc Plated Steel body and Grippers with Urethane Seals.
3. Socket Weld Test Plugs 1 ¼” QTY: 2
PN-SQS0168U
Socket Weld SQS Test Plug for 1-1/4" 3000# Class Socket Weld Fitting. Seal OD 1.33" (33.8mm). Gripper/Cone OD 1.62"
(41.1mm). 3/8 M NPT. Max Pressure 4000 PsiG (275 BarG). Plug materials are Zinc Plated Steel body and Grippers with Urethane Seals.
4. Socket Weld Test Plugs 1 ½” QTY: 2
PN-SQS0192U
Socket Weld SQS Test Plug for 1-1/2" 3000# Class Socket Weld Fitting. Seal OD 1.56" (39.6mm). Gripper/Cone OD 1.87" (47.5mm). 3/8 M NPT. Max Pressure 3600 PsiG (247 BarG). Plug materials are Zinc Plated Steel body and Grippers with Urethane Seals.
5. ODGT TEST PLUG ¼” QTY: 2
PN: ODGT025PESSNAV
Special OD GripTight® Test Plug for 1/4" Nominal Pipe Size. Pipe OD range 0.508-0.556" (12.90-14.12mm). SAE J1926-1 SAE-8 (3/4"-16 UNF-2B) Female Port. Maximum Pressure Rating 5000 PsiG (345 BarG). Plug materials are Stainless Steel with Urethane/EPDM Primary Seal and EPDM Insert O-Ring.
6. ODGT TEST PLUG 3/8” QTY: 2
PN: ODGT038PESSNAV
Special OD GripTight® Test Plug for 3/8" Nominal Pipe Size. Pipe OD range 0.643-0.691"(16.33-17.55mm). SAE J1926-1 SAE- 8(3/4"-16 UNF-2B) Female Port. Maximum Pressure Rating 5000 PsiG(345 BarG). Plug materials are Stainless Steel with Urethane/EPDM Primary Seal and EPDM lnsertO-Ring.
7. ODGT TEST PLUG ½” QTY: 2
PN: ODGT050PESSNAV
Special OD GripTight® Test Plug for 1/2" Nominal Pipe Size. Pipe OD range 0.808-0.856" (20.52-21.74mm). SAE J1926-1 SAE-8 (3/4"-16 UNF-2B) Female Port. Maximum Pressure Rating 5000 PsiG (345 BarG).Plug materials are Stainless Steel with Urethane/EPDM Primary Seal and EPDM Insert O-Ring.
8. ODGT TEST PLUG ¾” QTY: 2
PN: ODGT075PESSNAV
Special OD GripTight® Test Plug for 3/4" Nominal Pipe Size. Pipe OD range 1.018-1.066" (25.86-27.08mm). SAE J1926-1 SAE- 12 (1- 1/16"-12 UN-2B) Female Port. Maximum Pressure Rating 5000 PsiG (345 BarG). Plug materials are Stainless Steel with Urethane/EPDM Primary Seal and EPDM Insert O-Ring.
9. ODGT TEST PLUG 1” QTY: 2
PN: ODGT100PESSNAV
Special OD GripTight® Test Plug for 1" Nominal Pipe Size. Pipe OD range 1.283-1.331" (32.59-33.81mm). SAE J1926-1 SAE-16 (1-5/16"-12 UN-2B) Female Port. Maximum Pressure Rating 5000 PsiG (345 BarG).Plug materials are Stainless Steel with Urethane/EPDM Primary Seal and EPDM Insert O-Ring.
10. ODGT TEST PLUG 1-1/4” QTY: 2
PN: ODGT125PESSNAV
Special OD GripTight® Test Plug for 1-1/4" Nominal Pipe Size. Pipe OD range 1.628-1.676" (41.35-42.57mm). SAE J1926-1 SAE-20 (1-5/8"-12 UN-2B) Female port. Maximum Pressure Rating 5000 PsiG (345 BarG). Plug materials are Stainless Steel with Urethane/EPDM Primary Seal and EPDM Insert O-Ring.
11. ODGT TEST PLUG 1-1/2” QTY: 2
PN: ODGT150PESSNAV
Special OD Griptight® Test Plug for 1-1/2" Nominal Pipe Size.Pipe OD range 1.868-1.916" (47.45-48.67mm). SAE J1926-1 SAE-24 (1-7/8"-12 UN-2B) Female Port.Maximum Pressure Rating 5000 PsiG (345 BarG). Plug materials are Stainless Steel with Urethane/EPDM Primary Seal and EPDM Insert O-Ring.
12. SKET TEST PLUG ½” QTY: 2
PN: SQS086U
Socket Weld SQS Test Plug for 1/2" 3000# Class Socket Weld Fitting. Seal OD 0.59" (15.0mm). Gripper/Cone OD 0.82" (20.8mm). 1/8 M NPT. Max Pressure 5000 PsiG (343 BarG). Plug materials are Zinc Plated Steel body and Grippers with Urethane Seals.
The requirement will be solicited as a total small business set aside. The NAICS code applicable to this procurement is 332919, Socket Weld Test Plug with a size standard of 750 employees. The Product Service Code is 4730. The solicitation document incorporates provisions and clauses in effect through FAC 2024-01 and DFARS Change Notice 10/30/2023.
The manufacture for these components, and part numbers listed are Curtiss-Wright Industrial.
The anticipated delivery date for this acquisition is 7 weeks ARO. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only.
The solicitation number is SPMYM125Q0042, and it is expected to be available on or about 19 February 2025 and posted to SAM.gov, https://sam.gov/ Quotes will be due by 12:00 PM EST on 25 February 2025. Responses to the solicitation notice shall be emailed to the attention of Ronald Martin at ronald.c.martin@dla.mil . Please make sure that the solicitation number (SPMYM125Q0042) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues.
Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for the inability of the Offeror's to access solicitation documents posted. Prospective Offeror's should also register at on the interested vendor list under SPMYM125Q0042. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed.
All responsible sources may submit a proposal which may be considered by the Government. By submitting a quote, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates and procedures. Please direct all questions regarding this requirement to Ronald Martin at ronald.c.martin@dla.mil.
