1. Turf Mowing and Hard Surface Maintenance a. The Contractor shall mow the lawns at Bobbitt, Sykes, and Huntersquare Midrises according to the work schedule in Attachment K. Lawns shall be mowed to a height of 2 to 2.5 inches. b. The Contractor shall inspect the area, prior to mowing, and remove debris. Debris shall be properly disposed of offsite. There shall be no paper, plastic, or other foreign objects cut and scattered during mowing operations. Use of refuse containers on Authority property is prohibited. c. Uneven cuts, scalping, and varying heights of lawn areas will be considered unsatisfactory to Authority standards. The Contractor will be required to provide correction action at no cost to NRHA. d. The Contractor shall not bag grass clippings. Mulching mowers are preferred as they cut grass clippings into smaller pieces to allow grass to easily fall back into the soil. Grass clippings shall not result in clumping and/or heavy concentrations. Clippings shall be dispersed for an even lawn appearance. No grass clumps shall be left on the grounds...
