Specifications include, but are not limited to: The construction and placing of one (1) 10’ 6” x 12’ single user flush precast concrete toilet building. Site work, water, electrical, and sewage site connections to be placed. DESIGN CRITERIA The flush building has been designed to individually meet the following criteria. Calculations and engineer’s stamped drawings are available, for standard buildings, upon request by the customer and are for their sole and specific use only. The design criteria are to ensure that the flush building not only will withstand the forces of nature listed below, but to provide protection from vandalism and other unforeseen hazards. Building’s structural and foundation design will be relevant to the region and properties associated with its final placement. Design will also meet all applicable accessibility and building code requirements. Buildings will also meet various structural loads such as below, but not limited to/or restricted by them. A. Roof Snow Load 1. The flush building is designed to withstand a 250 PSF snow load. B. Floor Load 1. The flush building is designed to withstand 400 PSF floor load. C. Wind Load 1. The flush building will withstand the effects of 150 miles per hour (3-second gust) wind exposure C. D. Earthquake 1. The flush building will withstand the effects of a seismic group 1 design category E earthquake. E. Additional Design Standards 1. The flush building is designed to meet the accessibility requirements put forth by federal, state, and local statutes. 2. The flush building is an all concrete design with a minimum 3/12 roof pitch. The flush building shall have a minimum 4” wall, 4½” roof, and 5” floor thickness. 3. All wall to floor interior surface seams shall have a minimum 1” radius coving made of high strength grout. + Recycled Material + LED Lighting
