Specifications include, but are not limited to: ) All structural components must be tubular steel either square or round with appropriate wall thickness to length ratio to minimize flexibility. b) Must break down in manageable pieces for transport. c) When taller than 15’ the pieces must be able to support itself from upper lifting points while being hinge lifted off the ground onto its feet. d) A powder coated finish is required in white or black depending on the requirements of the pieces design theme. e) All cables and clamps must be stainless steel, flexible (and hold no memory). f) Stakes must be powder coated. g) Bulb types to be used are 120v LED or strip Pebble design for newer animation styles. h) All animation connections must be a plug with a threaded flange nut that seals to prevent any moisture from entering them. i) All conductors or sequencers must be weather tight and freestanding and powered by 120v. j) Contractor must have a representative on site for the initial set up and programming h) Contractor all display proposed shall be weather resistant.
