Technical Requirements - Rubber and Self-Inking Stamps All stamps shall be high quality. Rubber stamps shall be rubber face, photo polymer is acceptable. All stamps must be made in a professional manner (aligned neatly and orderly) in accordance with commercial standards. Any order found to be unacceptable (including errors by awarded Contractor) will be required to be re-made at no additional charge to Dallas County. Dallas County will be sole judge of quality. Stamps shall be complete and functional without the need for additional components. Stamps shall be furnished index labels. Rubber stamps must be furnished with wood handle and index labels. Self-inking stamps must include snap-out pad, minimum 10,000 impressions, Re-ink able and must include index labels. Photo polymer stamps are allowed on self-inking, Ink Colors: Black, Blue and/or Red. Brand: Ideal or equal Mount & Type-setting Requirements: Successful Contractor will be required to provide a variety of different size mounts for rubber stamps, pre-inked stamps, and different typestyles for both made to order rubber and pre-inked stamps. Types of Logos: The type of seals and/or logos used shall include, but not be limited to the following: County Seal, State of Texas Seals.
