Specifications include, but are not limited to: This 2020 single axle F 750 truck will be fitted with a Peterson TL3 Lightning Loader. Winning bidder shall verify with Peterson truck has been spec’d to accommodate specified loader model. GVW rating substantiated by published literature shall be not less than 33,000 regardless of the various components as listed herein. Frame: To be of “C” shaped, 1,500,000 RBM with minimum 11/32” frame thickness. Wheelbase: To be 260” and have a 186”CA, 120”AF, 419”OAL. Front Axle: Capacity at ground to be not less than 12,000 lbs; to be “I” beam construction with multi leaf heavy duty springs, To be furnished with power steering, front shock absorbers, stemco type seals & 50W synthetic oil. Rear Axle: To be equipped with one-piece housing having one speed rear axle, with a minimum grade ability of 30%, and a minimum road speed of approximately 70 MPH at rated RPM. Capacity at ground to be not less than 23,000 lbs. w/ helper springs. To be filled w/ 75W-90 synthetic gear lube. Transmission: To have an automatic transmission filled with synthetic fluid and the dipstick shall be so labeled. It shall have the ability to mount a power takeoff on either side. Backup alarm to be installed before delivered. Brakes: To be hydraulic brake system, full power w/ automatic adjustment. To include rear axle parking brake, lever control. Engine: To be 6.8L, V10 gas, not less than 320 HP SAE gross horsepower at rated RPM and SAE gross torque of not less than 460 lbs. ft. @ 3,000 RPM. Fan to be automatic type, Low oil pressure and high water temperature buzzers to be supplied. Anti-freeze is to -34F Extended Life Coolant. All hoses to be Gates Blue Stripe or equivalent. To have gaseous fuel prep package installed.