Specifications include, but are not limited to: Frame: To be of “L” shaped reinforcing of fishplate with front bumper in-line with mainframe for heavy-duty snowplow operation or 16.98 SM with 120,000 psi steel frame. To have extended front frame for snow plow application. Wheelbase: To be approximately 150” and have an effective cab to axle dimension of approximately 84”. Front Axle: Capacity at ground to be not less than 13,300 lbs; to be “I” beam construction with multi leaf heavy duty springs, 7,000 lbs. at ground each side. To be furnished with power steering, front shock absorbers, and wet stemco type seals. Rear Axle: To be equipped with one-piece housing having one speed rear axle, with a minimum grade ability of 30%, and a minimum road speed of approximately 70 MPH at rated RPM. Capacity at ground to be not less than 23,000 lbs. w/ 23,500 springs. Transmission: To have an Allison 3500RDS series automatic transmission filled with synthetic fluid and the dipstick shall be so labeled. It shall have the ability to mount a power takeoff on either side. Backup alarm to be installed before delivery.
