Specifications include, but are not limited to: S: The Contractor shall furnish and deliver one (1), Brand Name “Trail King TK50RB” or approved equivalent 25 Ton Tri-Axle Rollback Trailer per the below specifications. FOB Destination price quote shall be provided. No additional charges for shipping and handling shall be invoiced. 1. TRAILER DECK: To be triple axle with rollback deck. The deck shall be 30’ long and 8.5’ wide with approximately 7’ tongue. The overall loaded height to be approximately 36”. To be constructed of one-piece, I-beams crossmembers on centers with I-beams & formed channel centers. Deck is to be made of oak and have a minimum of four heavy-duty Drings per side. Minimum 4” headboard to be located at front of trailer deck. Deck to roll back and tilt to a maximum of 8 degrees. 2. HYDRAULIC SYSTEM: The operation of the rollback, tilt and approach plate is to be derived from a self-contained 13hp gasoline engine and include all required controls for operation. Rear of deck shall include a hydraulically controlled knife-edge fold down approach plate. To include an adjustable bed lock. 3. TOWING: The tow eye is to be standard 3” inside diameter, pintle eye type and fully adjustable. A 25,000 lb. heavyduty drop-leg jack is to be supplied. Tongue must be equipped with a pair of Grade 80 safety chains complete with grab hook with safety locks. 4. SUSPENSION: The trailer shall be equipped with multi-leaf, spring suspension. 5. WHEELS/TIRES: Axles and wheels shall be truck-type. Tires shall be radial and correct for trailer capacity, minimum 235/75R17.5 and must be brand name tires and have oil seal hubs. Must include spare tire with holder.