Specifications include, but are not limited to: OUTSIDE MATS: Anderson Brush Hog or acceptable equal. 2.2.1.Performance: High performance outside matting will aggressively scrape particles and moisture from shoes and books prior to entering building to reduce tracking of contaminant onto inside floor surfaces. 2.2.2.Construction: Face: Shall be coarse fiber construction, such as nylon, for long product life. Backing: Shall be premium rubber that will not crack or curl or no backing. Backing if used will have flat rubber border allowing moisture to run off 2.2.3.Sizes: Sizes shall be available in a variety of standard and custom sizes ranging from three feet to six feet wide and five feet to twelve feet long. 2.2.4.Colors: May be available in various color options. 2.3.ENTRANCE MATS: Anderson Water Hog Classic or acceptable equal. 2.3.1.Performance: Entrance matting will reduce the amount of contaminants and particles entering the building by providing a scraping/wiping surface inside the entry door. High performance matting for purchase under proposed contract shall effectively help prevent soil, ice melt, snow, other particles and water from entering buildings beyond matted area; store particles and moisture for later removal; minimize tracking into building by storing particles and water below shoe level within the mat to prevent further transfer to building; must be easy to clean by vacuuming, extraction cleaning, wetdry vacuum or other standard cleaning method; provide a safe surface, preventing slip and fall accidents and mats shall not support microbial growth. 2.3.2.Construction: Backing Material: Rubber, exhibiting positive resilience, abrasion, wear and tensile qualities. Vinyl backing may not be acceptable; shall have raised rubber edging continuous with backing to hold water and contaminants within the mat; shall be available in flat and gripper backing types; gripper surface must extend for entire mat coverage area and shall be non-porous backing inhibiting mold/mildew growth.