Specifications include, but are not limited to: 1. Maintain communication with the MPM on a regular basis. 2. Coordinate with the Municipality, Design Engineer, VTrans and the Construction Contractor(s). 3. Review and have a thorough understanding of contract plans, specifications, estimates and contract special provisions. 4. Coordinate, schedule and oversee the pre-construction conference. Coordinate, schedule and attend the Final Inspection. Attend all other job-related meetings. 5. Make sure contractor contacts Dig-Safe. 6. Preparation of Daily Reports, including quantities. 7. Maintain a photographic record of the progress of construction, annotating such photos to indicate their content and context including date. This photographic record must be available for reference by the MPM, Design Engineer, State or Federal representatives, and Municipal representatives. 8. Accompany the MPM, Design Engineer, State or Federal representatives and Municipal representatives on visits to the project. 9. Participate once every two weeks in regularly scheduled Construction Status meetings with the Contractor, MPM, Design Engineer, State or Federal representatives and Municipal representatives. 10. Report immediately any unusual occurrences and all accidents occurring within the project limits to the MPM and the Design Engineer. 11. Calculation and verification of the final contract quantities. 12. Review and submit to the Town, or the Design Engineer if required by the Town, any suggestions or requests made by the contractor to change or modify any requirements of the Plans or Contract Documents. 13. Receive certificates, computations and reference materials submitted by the Contractor. Maintain files on the project site of all items submitted by the contractor and of work done on behalf of the Municipality.