Loading...
Skip to main content
< Back to results

Wire Rope Barrier Safety systems and Repair Parts


Location
Utah
Publication Date
11/27/2018 10:18 AM EST
Closing Date
12/11/2018 04:00 PM EST
Issuing Organization
State of Utah - Department of Transportation
Solicitation Number
Description

Specifications include, but are not limited to: Wire Rope – Galvanized wire rope ¾ inch 3 x 7, constructed according to AASHTO M 30 / ASTM A 741 Type I, Class A coating, with a Modified Breaking Strength Minimum equal to 39,000 lb. 1. Wire rope meets manufacturer’s specifications. Pre-stretch wire rope during manufacturing to exhibit a minimum wire rope modulus of elasticity of 19,000,000 psi according to ISO 12076-202, Wire Rope Modulus of Elasticity, with no bending or pre-stretching of the rope permitted in testing. a. Furnish a separate certification from the wire rope manufacturer stating it meets the cable barrier manufacturer’s requirements if the wire rope is an outsourced product of the cable barrier system manufacturer. b. Factory swaged ends on each end of typical cable length. 1) Each cable will have a left hand thread on one end and a right hand thread on the other end.

Source
https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=StateOfUtah (opens in a new window)

Get instant access

to solicitation details & future business opportunities.

Get Access

Vendor packages with access to similar open solicitations

Statewide

Matching bid notifications & access to all Statewide & Group bid details

Group

Matching bid notifications from participating agencies

Basic

Access participating agency bids