Specifications include, but are not limited to: Lop & Scatter: All Juniper trees (live and dead) within the project boundaries shall be completely severed from the stump(s), as identified below. No live limbs shall be left on the stump of cut trees. All main branches or stems shall be cut from the trunk of the tree to meet scattering requirements. Remove all juniper within boundary areas. Old growth characteristic trees MAY be left and will be identified by government employees. Cut material shall be lopped and scattered so that slash height does not exceed 18” above the ground. Cut material left on site (boles) shall be limbed and not exceed 48” in length. Stump heights shall be 6” or less from the ground Slash generated by project activities will be removed from stream channels at the end of each operational shift.