Specifications include, but are not limited to: A. Provide on-call structural engineering and consulting services, and connection inspection and testing consulting services for various Projects for the Salt Lake City International Airport, South Valley Regional Airport in West Jordan and the Tooele Valley Airport. Consulting services shall include, but not be limited to, all basic relative engineering services to design and oversee construction of finished facilities or systems ready for occupancy or use. B. Prepare all or portions of construction plans, specifications and contract documents necessary to publicly advertise for and solicit competitive bids, and for construction of projects. Provide all technical provisions and other required documents. Note: The SLCDA may elect to perform portions of the Project assigned to the Respondent, e.g., drafting, surveying, etc. In most instances, the SLCDA will provide the cover sheet for the plans and Project manual, instructions to bidders, bid forms, agreement, bond forms, the general conditions, special provisions, FAA forms and regulations, etc. C. Make on-site observations and surveys to verify as-built conditions of existing facilities as necessary to coordinate and integrate all construction and demolition for the Project. D. Prepare detailed drawings of all required improvements. All drawings shall be submitted in AutoCAD, latest Release. Final design drawings and as-built record drawings shall be submitted on 24" X 36" bond and CD-ROM. Specifications shall be submitted in Microsoft Word format. E. Prepare construction staging plans and schedules that identify the sequence of construction activities to minimize impacts to existing airport operations. F. Deliver documents to the SLCDA for review and participate in review meetings as design progresses. Formal review meetings will be held at the schematic and design development stages and when the construction documents are approximately 50, 90, and 100 percent complete. The design development review shall include an outline specification.