Specifications include, but are not limited to: Removal of Existing Fence: Removal of all fence posts, wire and any material that is part of the existing fence. Disposal of the fence posts, wire and any material that is part of the existing fence by recycling, or at a landfill. No part of the existing fence shall be left on properties, all materials shall be removed from the fence line and properties. Fencing: New Wood posts, Steel posts, etc. shall be set plumb (vertical), in complete alignment, dirt packed solid and to be sturdy. All wood posts and wood braces will be Juniper wood (Cedar Posts), unless specified otherwise. Completed fences shall be in alignment, taut, and solid at all points. Wire spacing will be measured perpendicular to the ground. All four strands of barbed wire to be 12 ½ gauge, 2 pt. Tie wire for braces to be 9-gauge steel. Steel panel gates will be provided and installed by contract. Wood post braces shall be used to support steel panel gates.